Avedis MD7 500 Series Microphone Preamplifier
$850.00
All discrete op-amp based preamplifier with Jensen® Transformers, Send and Return/DI for adding external effects.
All discrete op-amp based preamplifier with Jensen® Transformers, Send and Return/DI for adding external effects.
Additional Information
All discrete op-amp based preamplifier with Jensen® Transformers, Send and Return/DI for adding external effects.
- Gain range from 0dB – 64dB in 4dB steps for recall-ability
- Input Trim control for fine control of gain
- No input PAD to drive transformer into saturation during peaks
- Utilizes the discrete 1122 op-amp known for depth and resolution
- All discrete design with Class A buffer amplifier
- Line Input to interface with DAW’s
- Custom Jensen input & output transformers
- SEND feature to run signal through stomp boxes for variety of effects
- Wide bandwidth, high headroom, very low noise
- Phase reverse, and filtered 48V phantom power
- High Pass Filter using a gentle slope for natural bass roll-off (-3dB @ 80Hz)
- 10 Meg-ohm high impedance DI input great for all instrument pickups
- Perfect for using as a re-amplification device
- Designed and manufactured in Los Angeles
Specifications
- Frequency Response <10Hz to -3dB at 75kHz
- Mic Input Impedance ≅1500 ohms
- Line Input Impedance 10k ohms
- Output Impedance <75 ohms
- DI Input Impedance 10M Ohms
- SEND Output Impedance 300 Ohms
- Common Mode Rejection Ratio >123dB min @ 60Hz
- Maximum Output Level +28.8 dBu @ 100KΩ, +27.4 dBu @ 600Ω
- Power Requirements ±16 vdc @ 35mA per rail
- Gain Voltage 0 to 22 Volts
- Gain dB 0 to 64.7 dB
- Equivalent Input Noise −114 dBu; Unweighted 300kHz bandwidth
- Weight 2.6 lbs / 1.18kg
Be the first to review “Avedis MD7 500 Series Microphone Preamplifier” Cancel reply
All discrete op-amp based preamplifier with Jensen® Transformers, Send and Return/DI for adding external effects.
- Gain range from 0dB – 64dB in 4dB steps for recall-ability
- Input Trim control for fine control of gain
- No input PAD to drive transformer into saturation during peaks
- Utilizes the discrete 1122 op-amp known for depth and resolution
- All discrete design with Class A buffer amplifier
- Line Input to interface with DAW’s
- Custom Jensen input & output transformers
- SEND feature to run signal through stomp boxes for variety of effects
- Wide bandwidth, high headroom, very low noise
- Phase reverse, and filtered 48V phantom power
- High Pass Filter using a gentle slope for natural bass roll-off (-3dB @ 80Hz)
- 10 Meg-ohm high impedance DI input great for all instrument pickups
- Perfect for using as a re-amplification device
- Designed and manufactured in Los Angeles
Specifications
- Frequency Response <10Hz to -3dB at 75kHz
- Mic Input Impedance ≅1500 ohms
- Line Input Impedance 10k ohms
- Output Impedance <75 ohms
- DI Input Impedance 10M Ohms
- SEND Output Impedance 300 Ohms
- Common Mode Rejection Ratio >123dB min @ 60Hz
- Maximum Output Level +28.8 dBu @ 100KΩ, +27.4 dBu @ 600Ω
- Power Requirements ±16 vdc @ 35mA per rail
- Gain Voltage 0 to 22 Volts
- Gain dB 0 to 64.7 dB
- Equivalent Input Noise −114 dBu; Unweighted 300kHz bandwidth
- Weight 2.6 lbs / 1.18kg
Reviews
There are no reviews yet.
Be the first to review “Avedis MD7 500 Series Microphone Preamplifier” Cancel reply
Related Products
A-Designs MIX FACTORY
$3,250.00
A-Designs P-1 Preamp
$900.00
Your Cart
No products in the cart.
Reviews
There are no reviews yet.